Cosmos

Hi guys, I had to put a new lights for my trailer and i did something wrong. I used to have wiring done for my car once i had hitch installed by Hitch company and i never touched anything. My driver's trailer light wasn't working since i bought my boat and i decided to open it for checking, i found rust everywhere, i cut i cable and found that copper wire is black(which i guess is bad thing). Took my passengers lights and connected it to the driver's - i think this way i can see if wire is still good to use, because it was not working i decided to put all new. Went to CT and got a brand new set of lights, put them and connected. Put the light on and NOTHING, turns and stop lights are working fine, cars lights are ok as well, but on the trailer once the light are on trailer lights are still off. As i said i didn't touch anything in the car, there is some kind of red small box installed between car lights and trailer harness in the car as well. I am wondering if somebody can give me a good advise what to do. Any help will be greatly apprecited.

Thanks, i will do this.

Thank you for quick answer. What is a way to install this fitting?

I don't mind to take it, but they said they don't have any fittings left.

Hi guys, I am looking for spare gas tank for my boat. Following advise of one OFNer i gave a call to Sandy Cove Marine. They do have tanks in stock. Actually everything is 40% off. They said with proper fitting i should be fine. I have 9,9 HP Johnson 2000, i found this fitting: http://www.canadiantire.ca/AST/browse/5/SportsRec/Marine/BoatPartsAccessories/PRD~0799026P/Johnson%25252BEvinrude%25252BOMC%252BTank%252BFitting.jsp?locale=en My question is - if i will get that tank and will put this fitting would i need something else or i would be ready to go? I don't really understand the way that fitting should be installed. Is any kind of tube in that tank coming to the fitting to get the fuel from the bottom of the tank? Thank you

Are you talking about this product: http://www.totalbattery.com/details.asp?id=379 Did you use it yourself?

French River, call French river supply Post at 705-857-2128. You can rent a boat from them. it's a full bunch of beatiful camp sites and fishing is pretty much always good.

You need Motor treatment, just add it to your gas tank.

thanks man

Hi guys, I am planning a camping there and would like to know how is fishing? Any advises would be greatly appreciated.

Can you tell us what exactly is on sale, i don't have this flyer yet.

Hi guys, I spent 2 weekends looking for pike on Canal and Mitchell lakes. Both times got scunked. We event went to Balsam Lake and saw a guys pulled out 10 lb muskie from trent canal. I think it's a little bit too cold yet. Also, i didn't mark any bait fish.

I think you can fish it all year around since last year, i was fishing Canal and Mitchel for pike this season already. I saw a lot of people fishing without any luck.

I had a big issue with Cabelas last time i placed my order. They charged me twice, after that they lost my shipment. Got my shipmet in 2 months from day I ordered it. Maybe it's just me.

Yes for now, They were installed last summer, I don't think I need to check them yet.

Hi guys, Just an update: I heated up the ends with lighter and used a really small screwdriver to push inside. This worked for me. I was able to add grease after that without any problem. Thank you very much for all your help.

When I was living in Belarus, I had a chance to use jaxon fishing products - line, lures. Those were really good quality products, inexpensive also. I would give it a try, I don't think it's as good as St Croix, but it would be still really good product in my opinion.

I think my next question is where I can fix bearings(reaplace) in Newmarket area and how much does it cost? Thanks

I can't replace everything, those bearing buddies were installed last year. Trailer was stored outside last winter.

Is it ok if I will try to heat the ends with lighter?

Hi guys, I have a question about bearing buddies - i bought a trailer with bearing buddies and seller told me that i will need to add some grease. I went to Canadian tire today and got myself a grease gun. I put a cartridge in it (i had some mobil1 red grease cartridge 1/2 full). Test it - grease came out. Ok. I push that attachment to bearing buddy and try to squeze a handle - and i can't. It's not going. Ok. I tried to removed attachment - i did this, but it was really hard to remove it. I check the bearings buddy web site - and it says there - if you can't move a piston - you need to add grease. Can somebody explain to me what i am doing wrong? Does it matter what kind of grease i am trying to add? Thanks.

I saw a lot of people fishing in the Bradford close to the bridge last Saturday and Sunday.

Boat was on the same spot since last fall - never got any issue until now. Will move it to garage for now to prevent any problems.