Cosmos

Same thing - not working, tried already. I think i did something to converter when i was switching light in the first place. I already checked all wiring. I guess will have to buy a new converter and try with it.

When car is off and the light are off, signals and brakes are working. Once lights are on doen't matter car engine is running or not - they aren't working any more. I guess i screwed up with converter, i will try to connect wires directly tomorrow. Will keep you posted.

Just a small update - i was checking lights when car wasn't on started. I started the car and none of the trailer lights are working now, car lights are OK - all of them. Once car is on none of signals are working on the trailer. But once the engine is off, turn signals and stop signals are OK. I guess i have done something to car wiring once i was switching the lights.

Are you talking about white cable? Using a screw i attached it to the trailer frame.

Hi guys, I had to put a new lights for my trailer and i did something wrong. I used to have wiring done for my car once i had hitch installed by Hitch company and i never touched anything. My driver's trailer light wasn't working since i bought my boat and i decided to open it for checking, i found rust everywhere, i cut i cable and found that copper wire is black(which i guess is bad thing). Took my passengers lights and connected it to the driver's - i think this way i can see if wire is still good to use, because it was not working i decided to put all new. Went to CT and got a brand new set of lights, put them and connected. Put the light on and NOTHING, turns and stop lights are working fine, cars lights are ok as well, but on the trailer once the light are on trailer lights are still off. As i said i didn't touch anything in the car, there is some kind of red small box installed between car lights and trailer harness in the car as well. I am wondering if somebody can give me a good advise what to do. Any help will be greatly apprecited.

Thanks, i will do this.

Thank you for quick answer. What is a way to install this fitting?

I don't mind to take it, but they said they don't have any fittings left.

Hi guys, I am looking for spare gas tank for my boat. Following advise of one OFNer i gave a call to Sandy Cove Marine. They do have tanks in stock. Actually everything is 40% off. They said with proper fitting i should be fine. I have 9,9 HP Johnson 2000, i found this fitting: http://www.canadiantire.ca/AST/browse/5/SportsRec/Marine/BoatPartsAccessories/PRD~0799026P/Johnson%25252BEvinrude%25252BOMC%252BTank%252BFitting.jsp?locale=en My question is - if i will get that tank and will put this fitting would i need something else or i would be ready to go? I don't really understand the way that fitting should be installed. Is any kind of tube in that tank coming to the fitting to get the fuel from the bottom of the tank? Thank you

Are you talking about this product: http://www.totalbattery.com/details.asp?id=379 Did you use it yourself?

French River, call French river supply Post at 705-857-2128. You can rent a boat from them. it's a full bunch of beatiful camp sites and fishing is pretty much always good.

You need Motor treatment, just add it to your gas tank.

thanks man

Hi guys, I am planning a camping there and would like to know how is fishing? Any advises would be greatly appreciated.

Can you tell us what exactly is on sale, i don't have this flyer yet.

Hi guys, I spent 2 weekends looking for pike on Canal and Mitchell lakes. Both times got scunked. We event went to Balsam Lake and saw a guys pulled out 10 lb muskie from trent canal. I think it's a little bit too cold yet. Also, i didn't mark any bait fish.

I think you can fish it all year around since last year, i was fishing Canal and Mitchel for pike this season already. I saw a lot of people fishing without any luck.

I had a big issue with Cabelas last time i placed my order. They charged me twice, after that they lost my shipment. Got my shipmet in 2 months from day I ordered it. Maybe it's just me.

Yes for now, They were installed last summer, I don't think I need to check them yet.

Hi guys, Just an update: I heated up the ends with lighter and used a really small screwdriver to push inside. This worked for me. I was able to add grease after that without any problem. Thank you very much for all your help.

When I was living in Belarus, I had a chance to use jaxon fishing products - line, lures. Those were really good quality products, inexpensive also. I would give it a try, I don't think it's as good as St Croix, but it would be still really good product in my opinion.

I think my next question is where I can fix bearings(reaplace) in Newmarket area and how much does it cost? Thanks

I can't replace everything, those bearing buddies were installed last year. Trailer was stored outside last winter.

Is it ok if I will try to heat the ends with lighter?