Hi there, this is an extension to a previous post I did a few days ago.
I re-packed the bearings on my trailer and took it for a quick spin tonight ( 1 exit on the highway). When I got back, I jacked it up to check and see if there was any play in the wheel and there was in both wheels. Not a lot, but I had none before I took it for a drive. I took out the cotter pin and sure enough was able to get a good full turn out of the nut. I tightened it up, re-installed the cotter pin and took it for another spin on the highway again (1 exit). When I got back, I jacked it up and there was no play in the wheels at all, so I am guessing that the bearings weren't fully seated and taking it for a spin set them.
I'm a little nervous about it now though and have a few more questions. As info, it's a 2007 easy hauler (16 foot boat). I bought the boat used, so have no idea how well the bearings were cared for previously, but they looked O.K. when i took it apart.
1. When i touched the hub after the run on the highway, one hub was warm to the touch (not hot), and the other was luke warm. Is that normal?
2. How much does it cost normally to get someone to change the bearings for you. I have a tight budget, but am now wondering if it is a good idea to do.
thanks in advance.