skinny

ok I have a 97 f150 that was running ok. I parked it at a creek to fih when I was ready to leave it backfired.

ever since it runs like its out of time popping and snaping.

i had my neighbor over with his scan tool it gave no real codes to help

I have swapped out coil packs and also the mass air sensor with no change

looking for pointers or ideas

I would check the timing chain but it looks lke alot of work anyone have a simple way to check it

could really use some ideas need to drive to work in morn

Ok so got up like I was going o work (5:00). was wide awake so I headed to the local river. I get there to find the guys that are always there on the bank. I watch a guy land a nice rainbow. then I go to the other side and start to toss a mepps. and wahm fish on. After a fight I land a nice one. I keep tossing the silver mepps for some time without luck.I decide to try out my new rod and grab my selus with a pathermartin on it with big pink bell and toss away no luck. then on a whim I go back to my tuck and grab a rod with a wacky hook on it a a berkly pink worm hooked wacky style. I walk to the bank toss it in and fish on that s #2 . The third I hooked into was also on the worm and the bigest of the day. the only pictures I have are the other guys stringer with his fish also. I kept 2 so when I got home it was clean time. I had only ever once cleaned a lrg trout and it was bit of a hack job.

I took my time and dis a much beter job but I still feel something is not right in the way I did it. as I know there is a fair amout of bones left in the fillets . Is this the way it is.

I'm going to look at a 95 Toyota.If it's as good as I'm told I will purchase it . I'm curious as to the red book value of such a suv. If I do buy it I will be looking to put a trip permimt on it and I'm pretty sure you must pay taxes right then based on red book or purchase price which ever is greater

just thought I mght get some other sites besides kijji to look thru

doesn't need to be truck could be suv like jeep or others

what i have is really beyond repair

frame is getting bad and body is not great either

I would love to have more cash to spend but it's not going to happen anytime quick. I'm also trying to dig out of a big hole created from not working (I am now)

ok it's time to replace my ford f-150 what sites do you use????

what I need is

to be able to pull my boat (16ft starcraft tiller)

seat 4

be resonable on fuel (I drive 1/2hr each way to work)

and max cash I have is 3000.00

been looking on kijji with out very much luck I will travel to look at something real good

i just bought a mustang auto haven't used it yet . I thought about one for a year. it's got to be better than having the regular PDF sitting on the floor

If its not leaking, just leave it alone.

 

Why fix whats not broken?

 

S.

now is the time as the floors are out and I can get to it

I would hate to get the boat all back togethere then have a problem

I know it's hard to see in the photos but this is right on a bend in the hull

so I don't think a rivet will work

ok SO I was working on my boat . I'm doing the new floor thing . when I pulled out the old ones I found this sticking up .

it's not in a real good spot as it's near the bend in side for the water line. I don't know anyone that can weld it and I have heard mixed things about welding as it work harden the alum.

inside boat look down from top

outside boat

I know way back i was told that now days it didn't matter if on wood or not . but back long time ago was always told not to put batterys on concrete. I guess old ways stay around

the interstate when to full charge with in an hour

have swiched to other now

ok I just stuck the interstate on a 2amp charge

and as soon as i find my solar charger I will add it to the other I'm pretty sure they both had near full charge on them when I took them out.

ok here is what I did

I took them out of my boat late October or November and put them in my non heated garage on a piece of wood and I guess walked away (I thought I put my sloar charger on them). So today I happened to kind trip on them and thought oh no I didn't do anything to them.

I have a solar charger and a big shop type battery charge that will do 2 amp charge.

What should I do to hopefully lesson and damages from not keeping them cycleling .

one is a group 27 interstate the other is a nautalist battery both deep cycle I believe

any pointers would be great

here is the specs on the rod

length 6'10"

power medium heavy

action fast

construction 24 ton

it is also labled spinnerbait

ok so I got a new rod at the london Fishing show it is a sellus baitcast. So now I will have to find a reel for it. I'm open to sugestions and possible purchase of used reel. I curently have 2 baitcast reels on of each hand but when I use a spining set up I reel with my left. So I think I'm looking for a left hand reel

Let me know what you think I should use and why and pm me if you have something used

I was there as a first timer I thought it was not to bad. I was going to pick up a shimano sellus rod but the group I was with were going to bass pro to so I held off just to find out bass pro had no bait cast rod of that make. Maybe I will find in London

going to try that one thanks

still open to any other possiblities

I have some Jpeg files Ineed switched to dfx I'm told its not simple to do.I would like to have these done so I can have them routed into wood on a cnc router

ok so a relitve gets an offer from her service provider to upgrade her Iphone to the new one and she goes for it. I asked her what she was doing with the old one and next I know it's in my mail box. thats great for me.

So what do you guys have on you Iphone for aplications that are some how related to fishing

that can also happen fromthe car never reaching proper temps. Back when I was doing automotive for a living I had a customer that did regular oil changes but the car only ever went about 4 blocks then shut off.He would walk out his door start the car put in drive and go then shut it off as soon as he was at work. I had to change valve cover gaskets on it and it was full of sludge like the pictures. after that I had the guy warm the car before heading out.

Thanks guys I knew I could get answers

I looked real close at it today at work and there is no holes it it at all

no screws on outside I'm sure of it

I know the guy actually pulled the alarm

Hey there I need to run a fire systems check at work . I was shown once very very quickly be for the other guy suddenly retired . Now he is gone and it is my job to run the test

I have to pull a station and reset it

I have included a picture of the station I cannot fid a name on it and I need to be able to reset it

I know he used a screwdriver. I think he just flipped something inside then closed the door .

any help would be great

way to go Vince hey not looking good for our Ice fishing event we started but hey you still in for our spring trip on LPB.

Things have been looking up for me also I think I have found a good place to work and I think I'm about to get a big change there too for the good. We need to hook up mister and chat