Jump to content

Tybo

Members
  • Posts

    1,373
  • Joined

  • Last visited

  • Days Won

    2

Posts posted by Tybo

  1. I know one thing. There people on this board that don't know physics.

    Drag is caused buy friction.

    When casting spinning reels the line loops down, making contact with every eye of the rod,friction!

     

    You will say that there is more friction in a bearing,Granted.

    On the scale that is used for bearing is a scale on 1 to 9,by two's

    1,3,5.7.9. 1 being the softest.

    The hard the bearing. The harder it's for the friction to cause heat. Less friction= less drag.

  2. Lower unit gear case damage. Striping the splines on the pinion gear is the one I've seen most.

    Friend hit a just below the surface ice hut.Likely cut the thing in half. He said, I was doing about 120.

    Prop was fine,Other things didn't fair so well.

     

    A SS prop on a 25. There will be more toque. Likely only tell the difference under heavy load.

     

    I like the myth about your prop turning.

    When trailering your boat you should put it in gear.

    This will prevent the seal from wearing out. The water helps lubricate it!

     

    If water is getting to the contact area of the seal. You have a leaky seal.

×
×
  • Create New...