skinny

I'm always looking for places to surf and possibly buy from so tell me what you got

i will be putting the i/o back in I'm just starting to strip now I'm working in my drive so weather causes issues

I will try to get some posted Curently just working from my phone

so i'm two foot deep into a transom repair in a fibreglass boat looking for pointers and someone with experience to bounce stuff of of

found a pick of one but looking for info on building

the tumble drum is not it

fishing god that is not the style i'm looking for. I would like to see a picture of the unit grimbsbylander has

ok some time ago I saw a machine to scale fish not sure if it was in person or a vid but I remember it looked kinda like a propane tank with end cut off and grit glued to the inside walls I also think it might have been used for potatoes also the tank or cylinder stood up right hole in top and not sure if it vibrated or rotated to cause the action to remove scales anyway I'm trying to find pictures or video of the beast

ok so the boat I just bought in the fall has a sofy spot I found but the out drive. I found it the day I was packing it up for the winter and moving to storage I did not poke a ton at it yet so I'm not sure how big it is or how bad the hul is glass this is the wood in the back and it's by the out drive. I'm looking for info or options sucks I didn't see before and I'm real sure guy that sold it didn't either I'm hoping its a small spot of not much concern till next fall as i would like to use it also been looking at a epoxy that they say u can patch with

meet me in there

my new boat has a top and side curtians but some of this stuff has lived folded in boxes and or up in same position for years what works good for softening this stuff up to make usable again

well I did it I bought a different boat its a 17.5 sea hawk 4cyl inboard bow rider I got real good deal on it and it came with a bunch of extras like a flare gun ( do I need this for this size boat) also last time I registered a boat I could do it at service Ontario but I thought I heard that was changing the boat also came with manual down riggers (is there a way to modify to power) darn I had more questions earlier guess I'm getting old more to come

So on Friday i got text form a friend down the street says bring family to the fish ladder. I gathered them up and took them . We watched as they moved about ten nice trout. yesterday I get text come to ladder there is lots today . I go and watch as they lift 32 they have said over 200 so far and are waiting for it to rain as the ladder will fill usally over 100 a day here is some vid from the ladder really it's my first time doing the vid thing so it is what it is

normally i do the filet thing right away but this time i was kinda between rock and hard spot

ok so Sunday I went ice fishing with a buddy. turned out to be a long day that was great but little fish. anyway I draged home 5 perch. When I arived homethe wife was having a gathering of friends from work so i wasn't going to filet the fish i stuck them in a bag and stuffed them in the freezer to do later well i forgot them till today so can I take them out thaw them filet them and refreeze them or should I filet and cook there isn't enough for the family to have so I need to becareful of when if I need to cook right away

ok found a bag of trout in freezer this is from the spring and I froze it in water. looking for pointers on how to handle it and smoke it should I let it defrost then brine it and smoke or should I go about it in some other way

well had some issues and they turned out soso first issue was I couldn't get the temp up in smoker seems because the gas line was off something climbed in and campped in the fitting and plugged the line. next I couldn't seem to get the dampners set right and I would loose my flame. so the smoking was off and on in the end I tossed them on the bbq they were not the best cut of ribs either. hope to have better luck next time thanks all

ok so they have been in brine since about 9pm and I work till 1030 then ight hit fishing hole till noon. I will dry them off and try to build a rub not sure what we have here to bulid it then I will follow the the info

ok so the Wife picked up some ribs and said lets smoke the for supper tomorrow now I havn't doe a ton of this. My Brother and I built a smoker but he took over cause he knows everything. I now have my own gas fires smoker it is a converted lay down barrel type where you would light the fire in one side then smoke traves thru and out. it has been converted to be fired on nat gas and i can hold temps as low as 150 so the ribs are on way here and when they get home I will get them in a brine I'm looking for sugestions but here is the basic brine I will use 1/4 cup kosher salt 1/4 cup packed brown sugar 4 cups water I'm not sure what to put in there with the brine I will be smoking over one of the below hickory cherry mesquite any ideas or pointers please

there is place just before the old cut livery called Post Marine I launch there most of the time ramp is smooth 10.00 to launch it also has a deep spot to power on to the trailer if you load that way. Randy has always been great with me I run some old equipment and he has always helped me out if need be.

ok so fish as of late has been real tough for me either things going bad on trips or no fish and sometimes both but the openner has topped it off. Here is my day Friday I get the floors back in my boat and all my gear ready. My little girl asks me if she can go I said no wasn't prepared to take her. she was upset. Sat morn I'm up 430 and so is my girl trying to convince me to take her . Still no . my buddy shows up we are off. we make the launch and it's open not backed up so I back in in kind of a hurry get launchd smoothly and i park the truck we head down the channle and there is a smaller channel that meets it. we head down because it produced last year. i put down the electric trolling motor and fish the channel. no fish and for some reason I can't cast worth poo. I finally get to the point I can cast but no fish we head out to the main channel and going to shoot for the bay. heading out of main channel just after boathouses you power up get on plane and clear the channel. so I get to the end of boat houses I power up but no plane so as I turn to go off to the side out of the way. I hear a snap from the front of boat i notice the trolling motor hanging from the side of boat. I broke the bow mount on the place it was repaired from a previous break. So my buddy pulls it up straps it down and we are off on a plane for now. As I'm thinking hey boat is runing well it's a nice day and gee this new inflatable lifejacket feels just like it's not even on. I look further up in boat and there is my buddy not in his jacket either then it dawns on me they are in the truck so turn around go back get the jackets and head back out. Ok we get out to an area and toss some lures nothing. We decide to head to the area of boats. as we go we troll and getting close my lure grabs a bunch of weeds so I crank it in and proceed to beat the weeds off but some stay so i reach to clean them off as I do the tiller turns and I reach for it and my new shimano sellus rod and curado reel head off the back of the boat. We turn around and look but can't find Then we fish somemore and move about.We hook2 or 3 but not many and decide to head to the other side of the bay about 3/4 of the way my 40hp dies and sounds way hot. I pull it up to find the intake/exaughst port spun around not allowing water in to cool. I fire up the small 9.8 motor I have hanging off the back and 2 hr later we make the launch . in the end bass opener cost me: a trolling motor mount (looking for good deal on one) shimano sellus rod curado reel head gasket and temp sender (possibly a impeller) 40hp evinrude I'm just about to the point of giving up

has anyone tried an roof top carriers

The run it up the middle will work for inturn but I would like another way to haul them and maybe be able to keep one or all the time

hey there been some time since I posted. I finally have a new daily driver it's a 1994 toyota 4 runner. This replaced a ford pickup that I use to just put rods in the box and away I went. the 4 runner is a bit different as it is all inside I would like to not break down the rods all the time. For that matter my newest rod is one piece. so I'm looking for ideas on how to store rods in or on the suv I had thought about a 3" tube on roof rack but that would only hold 1 and I wasn't sure how to keep them from sliding inside. anyway roof top or nice inside storage which ever let me hear see your ideas