Jump to content

silveradosheriff

Members
  • Posts

    1,025
  • Joined

  • Last visited

Posts posted by silveradosheriff

  1. OK, so finally got around to taking a picture of the Bert's system on the boat.

     

    There are two 4 foot tracks on the sides with the 8 foot bar across the back.

     

    Here is a pic of the whole system:

     

    Redneck_bling_1.JPG

     

    One major safety component for the bigger water is that the riggers are mounted much higher up than they were before. This results in a much easier handling of the rods when the salmon hit, with the bar serving as a safety device as you can brace against it.

    I'm running the ratchet rod holders which I highly recommend.

     

     

     

    Here is a closer shot of the one side:

     

    Redneck_bling_2.JPG

     

    I'll be running two sets of Salties off the sides for the inline boards and/or dipseys off the braid and wire.

     

     

     

     

    Followed by a side shot:

     

    Redneck_bling_3.JPG

     

     

     

    Still to come is the 9.9 kicker which will be added in the spring.

    More as an alternate power source as the F-90 does a great job trolling in terms of sound and fuel economy.

    In the larger rollers, a single point of power failure is not a good thing!

     

    :-)

  2. I'm guessing that a 4 would be working fairly hard to push 3 mph into the wind with some rollers added for good measure.

    I'll be using mine for trolling for Musky as well so I will need the extra speed.

    If there is someone using a 4 hp on around 1000 lb vessel - it would be great to hear their feedback....

     

    :D

×
×
  • Create New...