Jump to content

MJL

Members
  • Posts

    2,427
  • Joined

  • Last visited

Posts posted by MJL

  1. Carp don't guard nests like bass do. They spawn quick and dirty in weeds and leave. They also don't have much of an urge to feed anyway while they're spawning. What you do end up hooking are ones who have already finished or have yet to spawn.

  2. boiling corn only makes it easier to stick a baiting needle through... i use it hard and a mini drill by hand when the bite is off to pre drill the corn kernals...

     

    I would have to disagree with this statement. Soaking/Boiling corn not only makes it easier to hook, it renders the particle safe to eat for carp. Maize along with almost all other particle/nut/pulse/seed (exception being canned corn) has the ability to expand over time when wet. The idea is that you want the particle to expand to its maximum before you feed it to the fish. If not, they have the ability to expand inside the fish which could lead to digestive tract problems and death. Boiling particles also does a number of things: 1. It enhances the ability of the particle to take on flavours, 2. It kills any chance of the seed/particle from germinating inside the fish - many particles after all are seeds. If you're going to be using maize, it is recommended at a minimum to soak it at least 24 hrs before use.

     

    Article on maize

    http://www.carp.com/article44.html

     

    Particle preparation guide

    http://www.carpforum.co.uk/Shared/Messages.asp?TopicID=26850

     

    As far as tackle goes, carp fishing is far more dynamic than sitting behind a set of buzzers with the baitrunner set to free-spool. Most likely you already have tackle suitable to land them. For years I've used my heavier salmon/steelhead rods and centrepins to stalk them while they cruise the shoreline (I do this on the Toronto Islands). You can also float fish, fly fish (almost like fishing for bonefish on the flats), you can sight fish for them using slightly heavier bass/walleye tackle rigged with tubes, twister-tail jigs or flipping jigs and yes you can take the modern European approach and spoil yourself will electronic bite alarms, pods, carp rods and baitrunners.

     

    Carp fishing can be as simple or advanced as you want to make it.

     

    Hope this helps

  3. and btw... where is dsn? ... stop hogging the spot in front of the camera Mike. You did say that he caught fish too lol... lets see his face

     

    DSN has a bad back so he couldn't do much heavy lifting. It's not my fault when people skunk or drop their fish back into the water before I take a pic...Cough cough Victor cough.

     

    Did you get the weird carp / goldfish in the lake, or in a trib?

     

    I caught it in a small bay that empties out into Lake O. Judging by the number of people who walk by and told us that they released their pet goldfish there, I'm pretty sure it's a goldfish/carp hybrid. The last 3yrs we've seen orange goldfish to about 18" cruising by.

     

    Totally cool 007. Always wanted to catch a crucian. I don't think they're in North America yet. Too bad a lot of the waters over there are privatized. I watched a couple shows of Total Fishing with Matt Hayes and saw him fishing small agricultural run-off canals for chub. I imagine those might be free provided you get permission from the farmer. He was hauling in 4lb chub from a canal no wider than 10ft. I love the fishing in Canada. So do my friends in the UK. They don't fish much over there and save their $ on a 4-6wk long vacation here almost every year.

  4. where do i buy this stuff?

     

    as i am usually hikimg up river and hope to stay there for most of the day too.

     

    I got mine in a fly shop in Mississauga. I think it's called WithAFly. I think any tackle shop that sells Loon products should be able to get it for you.

  5. I use the UV wader repair stuff made by Loon - It's actually always in one of my wader pockets. Provided its sunny outside or you have access to a UV lamp, it cures within minutes regardless of whether the material is dry or wet. Certainly beats the 3-8hr cure time of Aquaseal. I applied it to a few holes last season and the patch of hardened goo is still going strong.

  6. For me, May is a confusing time of year. I love fishing for steelhead as much as I do for carp. The last 3 weeks were spent pursuing steel in various Lake Ontario tributaries with some serious mileage put on the “Rustang.” I figure I deserve some form of vacation after 7 months of not fishing.

     

    A few pics I thought were cool taken during my travels

     

    Spawning suckers

    DSC_5096.jpg

     

    These small things kept me in a state of cat-like readiness.

    DSC_5157.jpg

     

    Gorgeous brown

    DSC_5169.jpg

     

    And the sheer beauty of the Niagara whirlpool

    DSC_5204.jpg

     

    DSC_5186.jpg

     

    Kudos to CharlieD for hooking up with me out on the Niagara whirlpool – It was my first time down there for steel. Even with the slow fishing, with his guidance I was able to get into some fish. Also have to thank Solopaddler for his tips which proved very helpful.

     

    May 13

     

    I decided yesterday to put the steelhead gear on standby. Beyond a few new toys I acquired in the off season, I haven’t touched any of my carp gear since last September. I found a bucket full of moldy groundbait in the garage left from since then…I decided not to use it – The cottony white fungus put me off from touching it. I had a few hours to kill so I boiled up a pot of maize and headed down to one of my local swims on the Toronto waterfront to wet a line. Got there and met DSN. No clue how it would be. Thought it was going to be slow…In the end it was.

     

    Patiently waiting for a run

    May13007.jpg

     

    Although the action was slow, I did get into my first carp of 2008. It was the only one to be landed yesterday. It was a handful on the bank and required 2 people to restrain it – It went ballistic when we tried to unhook it.

     

    It was in the neighbourhood of mid-20s’ – A female bulked up with eggs. Here’s the release

    May13015.jpg

     

    May 14

     

    Decided to go back again today. Had lots of maize left. Chummed the area with maize and a ball of groundbait stuff DSN brought with him. Fish seemed to be cruising close in and we were fishing within 3-10ft from shore. It was chilly out with the breeze blowing over Lake Ontario which made fishing slightly uncomfortable.

     

    In about 5hrs of fishing I landed 2 fish and DSN landed 1. My first fish of the day was this one.

     

    May140021.jpg

     

    2nd fish was a neat surprise. It had oversized fins for its body which leads me to believe it’s a carp/goldfish hybrid. Certainly different from what I’m used to catching

     

    May14004.jpg

     

    All fish came on maize or canned corn. Nothing touched DSN’s boilies. Where we were, the water temps were still on the cold side – We actually saw 1 moldy rainbow cruising around on the first day. The fish didn’t fight particularly hard and most of them seemed more content sunning themselves than actually eating. DSN’s 10lber managed to put up a good tussle on his short and moderately light-action rod. Getting out fishing even in slow times is a lot better than work or doing stuff around the house. Can’t wait till the long weekend. Hopefully I’ll be on a road trip with a couple of friends probing various waters for carp.

     

    Hope you enjoyed

  7. Great catch. With all the talk of carp, it looks like it might be time to make the switch from steel.

     

    I can hardly wait till you get one that size in warmer water . . . . you'll have a ball! Since it's a bit of a drive down to Hamilton to Fishing World, any of you Toronto or Scarboro carpers have a fave store that stocks ANY decent carp gear out here? I suspect our 'New Angler' will be on the hunt for some, as summer approaches.

     

    Depends on what you need. In Scarborough, Angling Specialties has some carp gear in stock. Anglers International (Known mostly as the distributor of Raven products) also has various tackle made by ESP, Top Mix Baits, Kamasan, Drennan and AngSpec can pretty much get you anything from them. There's also a few bits and bobs of Nash tackle lying around.

     

    If you have nothing against mail/telephone order, I've ordered gear from the Long Sault Motel by phone. Jeff Vaughan has a wide selection of carp tackle. He lets you know the shipping and you have no additional brokerage or customs fees to pay. A great source of carp tackle IMO and for what I ordered, the prices would have been 45-65% higher if I ordered from one of the vendors in the States.

     

    FishOnline at Jane and Lawrence has a good selection of stuff if you're willing to travel across the city.

     

    Hope this helps

  8. Various things you can do.

     

    As Verminator mentioned, a stealthy approach to the pool is imperative. Crashing through the bush and noisy wading can put fish off the bite and into the deepest logjams.

     

    You can try downsizing tackle and bait provided that there is enough room to play fish away from snags. Changing up to 4lb leaders, size 14 hooks and micro roe bags (3-5 trout eggs per bag) and flies work wonders in pressured sitations.

     

    Hook up with someone more experienced than you - Even after years of fishing, I still do this for unfamiliar waters and when learning new techniques. They might be able to teach you things like how to make a drag free drift, where, when and how to use certain techniques (like spinners, bottom bouncing, fly fishing, float fishing, etc). I've been fortunate over my life to meet some of Ontario's finest steelheaders who have spent decades perfecting various techniques all over this province. Most of what I know today was passed on to me from other anglers I met on the bank who were nice enough to take the time and show me what I could be doing better. Step back and watch what others are doing...Really speeds up the learning curve.

     

    There are fish still in the rivers no doubt. I've been fishing quite a bit the last few weeks and have been getting into fish each trip. Some river stretches have been devoid of fish for the last 3 weeks while others still see dropbacks cruising about. Each river is different.

     

    Good luck

  9. From my understanding, this virus has already spread across Lake Erie, Niagara region, Lake Ontario and the St. Lawrence. I remember reading about KHV in the newspaper in 2001 when all the areas mentioned above were affected resulting in massive carp die-offs.

  10. Oh man,

    please tell me there are still some trout somewhere ..

    otherwise, i feel something empty inside of me ..

     

    started this crazy rainbow trout fishing last Nov and got hooked on it ..

    have been fishing them weekends after weekends ...

    regardless of weather .. (I swear I will NEVER and NEVER fish in -10c weather anymore)

     

    not to mention all gears have purchased from first centerpin, first float rod,

    to first everything since then ...

     

    it has been pretty much what has kept me going for the past couple months .. and now it is over

    and have to wait until the fall?

     

    oh man, there is something in my eyes ... what am i going to do?

    do you really expect me spending weekend and weekends with GF?

     

    Move to Michigan for the skamania - Steelhead almost all year round :thumbsup_anim:

     

    Steelhead are still around (at least for Lake O tribs I scouted) - should be there for the next little while. With that said, expect to do a fair bit of driving. On Wednesday my dad and I drove 300km to land 1 fish (my fish :thumbsup_anim: )

     

    If you're feeling adventurous, load up the car and head north to Lake Superior. You've got the St. Mary's, Nipigon river, steel river, jackpine plus dozen more tribs to fish

  11. I imagine the headwaters of rivers and smaller creeks are pretty close to being done. Scouted a few tribs during the past week and a lot of them were almost devoid of fish. Bigger rivers where fish go up further will still probably have decent numbers. In general think big.

  12. I keep mine in the Styrofoam worm containers that I reuse. I usually put shredded newspapers and spray them with dechlorinated water to keep them moist every so often. Apparently they need moisture because they breath through their skin. I don't feed mine because I use them pretty quick after picking (within a few weeks). A few commercial worm pickers I talked to fill their worm containers with a mixture of dirt and peat moss. They said the worms feed on peat moss.

     

    I have to keep mine in the cold room in the basement now...There was an incident a while back with the fridge and escapees :whistling:

×
×
  • Create New...