Raycaster Posted June 11, 2020 Report Share Posted June 11, 2020 Just purchased a used 2003ish Legend Xcite 164 and wondering about replacing the console windshield that is missing. As usual, the funds are pretty low so looking for as economical choice as possible. I’m wondering if a DIY plexiglass heatgun project would do it? I love DIY but if it’s going to look sketchy than not a option. Custom windshield online sound scary $$$ so any suggestions are welcome. Maybe scouring boat graveyards might be an option. Link to comment Share on other sites More sharing options...
Pigeontroller Posted June 12, 2020 Report Share Posted June 12, 2020 (edited) Should work, make a template out of paper or cardboard. Go to your local Glass company and get some nice Grey Plexiglass, use a heat gun cautiously...Maybe get a small test piece and practice. Edited June 12, 2020 by Pigeontroller added info 1 Link to comment Share on other sites More sharing options...
Hack_Fisherman Posted June 12, 2020 Report Share Posted June 12, 2020 I suggest Lexan over plexi. Plexi cracks easily and lexan/polycarbonate won’t. If your bends are long and crisp, I’d check to see if the glass shop can do the heat bends. Link to comment Share on other sites More sharing options...
Garnet Posted June 12, 2020 Report Share Posted June 12, 2020 You have 3 options Don't replace . Pay the price. DIY Think I would go fishing worry about that next year. Link to comment Share on other sites More sharing options...
OhioFisherman Posted June 12, 2020 Report Share Posted June 12, 2020 25 hp? might not need a windshield? Link to comment Share on other sites More sharing options...
Raycaster Posted June 12, 2020 Author Report Share Posted June 12, 2020 (edited) Actually took out yesterday on choppy Hamilton Bay. Over 20mph quickly with 2 people total. Not sure if windshield would of prevented me from getting soaked but would look better for sure. On a side note and not on topic, the 16ft Legend leans heavy to the right. I know a 200lb. driver doesn’t help but the other person 150lb. sat on left side. Also had 2 heavy trolling motor batteries in front left side. There is a empty live well on left side might level boat a bit. Will have to research more, will be looking for comparable boat during summer to ask Owner questions. Edited June 12, 2020 by Raycaster Spelling Link to comment Share on other sites More sharing options...
OhioFisherman Posted June 12, 2020 Report Share Posted June 12, 2020 roughly 8 pounds a gallon for water, a ten gallon livewell that would be a small one will change the weight balance quickly. Link to comment Share on other sites More sharing options...
lew Posted June 12, 2020 Report Share Posted June 12, 2020 25 minutes ago, OhioFisherman said: roughly 8 pounds a gallon for water, Actually 10 pounds per Imperial gallon here in Canada Paul 2 Link to comment Share on other sites More sharing options...
pics Posted June 12, 2020 Report Share Posted June 12, 2020 Boat graveyards exist but where would you find one?? Link to comment Share on other sites More sharing options...
Raycaster Posted June 12, 2020 Author Report Share Posted June 12, 2020 Isn't there a wrecking yard between Hamilton and Port Dover filled with some boats? Link to comment Share on other sites More sharing options...
irishfield Posted June 12, 2020 Report Share Posted June 12, 2020 As others have noted, Lexan and you can bend it cold in a metal brake to suit your needs.. Clean it with Pledge if you don't want to spring for plastic cleaner. 1 Link to comment Share on other sites More sharing options...
Raycaster Posted June 12, 2020 Author Report Share Posted June 12, 2020 (edited) I inquired at the plastic place downtown Hamilton and waiting for the email reply. I think a 45” x 20” piece should be ok. Did up a quick design and looks not too hard. Will probably round some corners too. Edited June 12, 2020 by Raycaster Link to comment Share on other sites More sharing options...
OhioFisherman Posted June 13, 2020 Report Share Posted June 13, 2020 Might be your best bet? I am guessing most in a boat graveyard might already be broken? Link to comment Share on other sites More sharing options...
Chris J Posted June 14, 2020 Report Share Posted June 14, 2020 Custom mold and tint. Out of Texas but if you want a windshield that looks stock. http://getaboatwindshield.com/ Link to comment Share on other sites More sharing options...
Hack_Fisherman Posted June 14, 2020 Report Share Posted June 14, 2020 22 hours ago, OhioFisherman said: Might be your best bet? I am guessing most in a boat graveyard might already be broken? Read the google reviews before you go. I wouldn’t go to one in particular Link to comment Share on other sites More sharing options...
shanty gord Posted June 14, 2020 Report Share Posted June 14, 2020 There is a place in Brampton called Acrylics by design that can make that for you give them a call Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now