bigcreekdad Posted May 6, 2018 Report Share Posted May 6, 2018 (edited) What do you use to support your boat cover so that water does not pool on it? Edited May 6, 2018 by bigcreekdad Link to comment Share on other sites More sharing options...
Fisherman Posted May 6, 2018 Report Share Posted May 6, 2018 There are things on a pole that are the shape of a mini umbrella that you can buy, now necessity of cheapness, an upside down 4 litre jug on a 1/2 inch dowel or plastic conduit should be good. Link to comment Share on other sites More sharing options...
mitch seguin Posted May 6, 2018 Report Share Posted May 6, 2018 For my 16.5 ft boat, I use 3 sections of electrical conduit into which I insert fiberglass tent poles to provide additional rigidity. The boat cover straps are drawn tight, providing a nice domed cover. Link to comment Share on other sites More sharing options...
Old Ironmaker Posted May 7, 2018 Report Share Posted May 7, 2018 (edited) I built mine with a ABS closet flange for the bottom base with a reducing coupling to go to 2", 3 or 4 feet of 2" ABS glued together then slid a pole into that that protrudes into a grommet on the cover. The toilet flange makes a nice stable base. Maybe 12 bucks each in materiaIs. I had the poles for the cover already but you can use anything like a broom handle. Even with the wind whipping off Erie they don't blow over. I don't tie the cover under the hull, I use Javex bottles filled with water hung on a few grommets on the sides with cordage and S hooks. Works fantastic in a slip too, no need to pull ties or mess with snaps. Edited May 7, 2018 by Old Ironmaker Link to comment Share on other sites More sharing options...
John Bacon Posted May 7, 2018 Report Share Posted May 7, 2018 Are you planning to use this for towing or just storage? I use a frame made by Navigloo for winter storage. It works well; but it's not for towing and takes a little too long to setup for covering the boat between trips. Link to comment Share on other sites More sharing options...
bigcreekdad Posted May 7, 2018 Author Report Share Posted May 7, 2018 Just for storage. Link to comment Share on other sites More sharing options...
grimsbylander Posted May 7, 2018 Report Share Posted May 7, 2018 I use a old white resin chair. Yep...they have rounded backs to prevent punctures and four legs so they don't tip over. You can easily trim the legs to get the right height too. El cheapo lol Link to comment Share on other sites More sharing options...
Lape0019 Posted May 7, 2018 Report Share Posted May 7, 2018 I used the umbrella things Fisherman brought up and it didn't last a week so I went back to using the seats that came with the boat. Link to comment Share on other sites More sharing options...
Old Ironmaker Posted May 7, 2018 Report Share Posted May 7, 2018 5 hours ago, Lape0019 said: I used the umbrella things Fisherman brought up and it didn't last a week so I went back to using the seats that came with the boat. I Iike it. Plus you can sit in them while having Boat Drinks parked I the driveway! Link to comment Share on other sites More sharing options...
Old Ironmaker Posted May 7, 2018 Report Share Posted May 7, 2018 6 hours ago, grimsbylander said: I use a old white resin chair. Yep...they have rounded backs to prevent punctures and four legs so they don't tip over. You can easily trim the legs to get the right height too. El cheapo lol I like it. Plus you can sit in them having Boat Drinks while the boat is parked o the driveway. Link to comment Share on other sites More sharing options...
farsider Posted May 7, 2018 Report Share Posted May 7, 2018 I used a plastic bucket/Aluminum pot/coffee can that I filled with concrete. While it was setting I inserted an off-cut of a 2x4 with nails/screws near the bottom that will be covered by the concrete. After it cures, screw another off-cut to the 2x4 or cut the original to desired height if it was long enough. Attach some rounded plastic or a sanded round off-cut to the top of the stand. Right, job done. Just what I had on hand but, easy to scrounge from a construction/renovation site. Cheers, Mark Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now