Jump to content

Workin' Down @ The Lake


Recommended Posts

GRRRRRR! I just paged back to the very beginning of this to remind of how the foundation was done. Dave, I guess those were Pbucket 'cause they ain't there no more! I had plans to review the entire post but that profit mongering outfit has ruined it for me and everyone else! What remains is still a work of art and genius, but it ain't all there for full impact! What a dirty shame.

 

Michael

Link to comment
Share on other sites

GRRRRRR! I just paged back to the very beginning of this to remind of how the foundation was done. Dave, I guess those were Pbucket 'cause they ain't there no more! I had plans to review the entire post but that profit mongering outfit has ruined it for me and everyone else! What remains is still a work of art and genius, but it ain't all there for full impact! What a dirty shame.

 

Michael

 

All that stuff is on my cabin building blog. ;)

All the new stuff gets done in the fall after freeze up.

 

http://www.anglersparadise.ca/

Link to comment
Share on other sites

Another couple of days work and I've completed the siding under the deck.

Still needs to be trimmed but the bulk of the work is done.


21950840_2134804226545905_78113801053739


Have also been working on building trim boards to go between the big windows and the upper smaller windows on the front wall.

The trim boards are 2 pieces of 2X8X12 foot long that have been pinned and glued together.


21950069_2134804136545914_75922238426175


Took a lot of time gluing, planing and sanding to get it like this.


21764948_2134804133212581_13893651949050


Will get the one side installed tomorrow and work on the trim over the left side angled window.

Link to comment
Share on other sites

Hard at 'er the past couple of days. Weather turns late tomorrow with cold NE winds and rain for Saturday night and Sunday.

Temps will have highs in the 40's starting Sunday and it ain't gittin' any warmer.

It's turning out just as I had envisioned it when I designed the cabin a few years ago. :)


22047949_2139947392698255_29609156064878


22104789_2139947506031577_70209773460692


22042132_2139947596031568_17707890539105


22050997_2139947709364890_67077935442644

Link to comment
Share on other sites

Dave I am surprised that the insulation is basically what code is here in Southern On. Heat loss will be high with all the gorgeous windows you have. I would have thought you would have gone with a closed cell spray where you are.

Kinda hard to get the equipment out to the site for spray foam.

Link to comment
Share on other sites

I don't know that it's the same out there, but here in SW Ontario, we literally do not have to build beyond R24 (in the walls at least) as building beyond that is redundant, the energy savings won't increase as by the time the heat/cold makes it through, typically the sun has set or is coming out (depending on heating/cooling season)

Link to comment
Share on other sites

Well a couple of rain days kept me working inside.

Reconfigured the washroom and made it bigger and roughed in for a window.


22141064_2147049545321373_28360530598310


Finally got the Hardie Shingle work done above the front windows too.

Took me 3 days to do this small section. Was worth the effort me thinks.


22179861_2147049515321376_70212376119227


22181567_2147049531988041_14754182557912


Working on trim tomorrow.

Link to comment
Share on other sites

Packed it in and headed home today.

Had enough of the crappy weather and not getting anything done.

Tried to do some work yesterday but the cold wind made it impossible.

Cleaned the site up and put stuff away for the winter.

Was cloudy and calm and in the low 30's when I left the dock so I went fisihin' fer an hour.

The fall bite is on!!!!!

Went 4 for 10 with 15 or 20 other smacks from pike in the hour.

No giants but one decent fish in the 36-38" range.


It only gets better between now and freeze up. :D


Will pull the dock next weekend hopefully the weather cooperates.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Topics

    Popular Topics

    Upcoming Events


×
×
  • Create New...