Jump to content

My Boat Build


Steve

Recommended Posts

As mentioned earlier in January, I decided to get my boat restored rather than purchasing a new hull. Trailer and motor were ok.

 

Boats these days have lost all their "fishability". By installing "through floor" rod storage (for max 7' rods) they have reduced the space needed for full size livewells. Notice these days boats have two small ones, rather than one good one. Fishing for fish larger than 22" requires a livewell much larger than found on todays boats.

 

My casting deck is also half the size of my boat....boats today have much smaller casting decks.

 

For these two main reasons is why I decided to get my boat restored, rather than buying new.

 

I decided on Ron Banks Marine service to do the job (after TONS of positive comments from folks who either know their work, or have had work done themselves). I was warned about his pricing - yep, it's expensive....but done correctly - the first time!

 

Replaced was 140 rivets, flooring (changing the lund 3/5" non marine ply to 3/4" marine ply). Also all carpet.

 

My "upgrades" were my electronics command centre, rigger mounts, and front trolling motor mount.

 

The price slowly escalated after each visit when I requested more and more upgrades....but it was all worth it in the end!

 

 

 

The Drop Off

 

img2012012100031.jpg

 

img2012012100030.jpg

 

img2012012100029.jpg

 

img2012012100026.jpg

 

img2012012100025.jpg

 

img2012012100024.jpg

 

 

 

Visit I

 

On my first visit I saw basically a stripped boat, with the 140 rivets changed and completed. All else was simply stripped. All stringers were in tact. Ron commented that my boat had "double supports" compared to lunds of today. My boat was a 1998 Lund Pro Guide CANADIAN EDITION. These were sent to lodges in the north under lease arrangements. My boat was sent to a lodge that quickly went under, so it didn't get much use. The reason I cannot find another one of my boats (i've never seen another in my life - internet, or on the water) is cause most of them were destroyed by heavy resort use.

 

 

img2012021800050.jpg

 

img2012021800049.jpg

 

img2012021800048.jpg

 

img2012021800047.jpg

 

img2012021800046.jpg

 

img2012021800045.jpg

 

img2012021800044.jpg

 

img2012021800043.jpg

 

img2012021800042.jpg

 

img2012021800041.jpg

 

img2012021800040.jpg

 

img2012021800039.jpg

 

img2012021800038.jpg

 

img2012021800037.jpg

 

Visit II

 

My second visit was to see it at about 60% completion. The rigger mounts were done, as was most of the electronics. The supports under the floor boards for the seats are second to none. Lund had tiny tin squares cut out for the bolts to go through. Not any more! Its actually embarrasing to see the short cuts taken on factory boat manufacturing.....and this is a lund - can you imagine the short cuts on lesser quality boats.... Boat manufacture's definitely follow the "out of sight, out of mind" mentality.

 

img2012031000075.jpg

 

img2012031000074.jpg

 

img2012031000071.jpg

 

img2012031000069.jpg

 

img2012031000068.jpg

 

img2012031000067.jpg

 

img2012031000066a.jpg

 

img2012031000065.jpg

 

img2012031000064.jpg

 

img2012031000063.jpg

 

img2012031000062.jpg

 

img2012031000061.jpg

 

img2012031000060.jpg

 

All Finished

 

The finished product was amazing.

 

img0688wt.jpg

 

img0687ul.jpg

 

img0685lk.jpg

 

img0684ud.jpg

 

img0683vg.jpg

 

img0682upy.jpg

 

img0681k.jpg

 

img0680fk.jpg

 

img0679fv.jpg

 

img0678nj.jpg

 

img0689zy.jpg

 

 

 

 

 

 

 

 

Oh, and our first outing Thursday evening for the water test.

 

img0677r.jpg

Link to comment
Share on other sites

nice work that rig looked in pretty rough shape for a 98!, I hope the refurbished rig will have a cover or garage! :thumbsup_anim:

 

Well, it has a garage...

 

but it spends most of its time on the water...and it certainly has no cover there...

 

the biggest issue is towing in the winter....fishing in the winter....hell, the winter in general. :wallbash:

Link to comment
Share on other sites

your boat basically looks the exact same as mine...just a few small differences... but overall really close...(for anyone trying to find a boat like this)

 

but i was lucky...this is the condition i bought mine in...

 

mines a 1997 lund explorer 1600

 

looks identicle to me...

 

great report....

 

P6170204_02.jpg

P6170205_02.jpg

P6170206_02.jpg

P6170207_02.jpg

P6170208_02.jpg

Edited by Musky Mike
Link to comment
Share on other sites

i'm not sure about the savings.

 

i'm about 60% into a new hull.

 

(the 2012 lund pro guide 1600 HULL ONLY is almost 15K - and this boat is now far superior to that boat. Oh, and my boat is a 1700 model...)

 

I know the feeling. I refurb'ed my 18'er, fully gutted with new foam and added aluminium bracing with an aluminium floor/vinyl. It's better than new but doesn't have the shine. It's a shame that I did all that work only to be selling it now but at least I know it was done right and will never need doing again.

At least you were wise enough to pay someone else; I missed a LOT of fishing time doing it myself.

It looks great and you will enjoy it for many more years.

Link to comment
Share on other sites

Biggest difference between the explorer and the pro guide is the transom width (pro guide an extra 3") and the casting deck length.

 

Pro Guide casting deck length almost 30" longer.

 

Of course, I'm comparing the 1700 explorer with the 1700 pro guide.

 

I'm not sure what your max hp is on the 1600, but the 1700's were the same at 60hp.

 

 

By the looks of your 1600, I'm not sure where the livewell is?

 

The 1700 Pro Guide, (I cannot remember the 1700 explorer) has the center livewell at 28 gallons.

 

Other than for the above, VERY CLOSE. And yes, yours is in great condition!

Edited by Steve
Link to comment
Share on other sites

Biggest difference between the explorer and the pro guide is the transom width (pro guide an extra 3") and the casting deck length.

 

Pro Guide casting deck length almost 30" longer.

 

Of course, I'm comparing the 1700 explorer with the 1700 pro guide.

 

I'm not sure what your max hp is on the 1600, but the 1700's were the same at 60hp.

 

 

By the looks of your 1600, I'm not sure where the livewell is?

 

The 1700 Pro Guide, (I cannot remember the 1700 explorer) has the center livewell at 28 gallons.

 

Other than for the above, VERY CLOSE. And yes, yours is in great condition!

 

 

livewell is beside my electronic controlls on the back left...third pic on the left you can see the livewell cover...under my sonar head unit...i think you have a baitwell there by the looks of it... mine is 36 inch well there instead... and where your big well is i have storage...

 

max hp is 45 for my boat...

 

and yes... my front deck is pretty small... but i prefer that and my extra floor space... some days i wish the deck was bigger... but most days im happy with what i got...

Link to comment
Share on other sites

Hey Steve and Musky Mike: What is the approximate towing weight of those outfits?

 

1998 Lund Pro Guide 1700 Canadian Edition

hull weight: 676lbs

50hp Yamaha motor weight: 247lbs

I run 3 12v batteries as well (add another 220lbs)

 

1997 Lund Explorer 1600

hull weight: 615lbs

45hp Honda motor weight: 214lbs

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Topics

    Popular Topics

    Upcoming Events


×
×
  • Create New...